CRUSHER

Spring Cone Crusher

Cone crusher is used for the treatment of above-average hardness of ore stone and stone, the spring system of insurance is to protect against ......

【Productive capacity】:20-300 T / H Note: This ability is the mean value, subject to the specific production capacity of the actual hardware configuration of the client.

【processed material】:granite, marble, basalt, iron ore, cobblestone, slate, bluestone, coal, cobblestone, construction materials

【Application area】:Metallurgy, construction, white fuel, transportation, chemical engineering and building materials.

properties

Cone crusher is used for the treatment of above-average hardness of ore stone and stone, of Spring Security is overload protection to protect the machine from damage metal, oil and water sealing to be adopted, the total rock dust and grease to ensure a stable operating performance, this type of crushing chamber It depends on the size of feeding and fineness of crushed product. Standard Type (PYB) is applied to medium crushing, medium type is applied to medium or fine crushing and the short head type is applied to fine crushing. Cone crusher is widely used in metallurgy, construction, white, fuel, transport, chemical engineering and building material for the treatment of above-average hardness rocks stone and stone, it has many advantages, such as reliable structure, high capacity, legkABOUT UStroit, low cost, etc. .d.

superior products

Thrust Washer

Increase or decrease the number of spacers to adjust the gap to chew and height of the point of suspension. Adding pads could Putting the position of the cone liner and the main axis to adjust the gap.

The unique shape of the cavity

Material is between cones to squeezed, bent and sheared to make the process simpler and lower power consumption.

overload protection

overload protection can extend the life of the machine.

Bearing

Higher speed operation, even the size of the final product, the cube shape of the product, high performance.


Principle of operation

Cone crusher crushes materials working surface between the movable cone and fixed cone. Thus, it is more advanced and efficiency than a jaw crusher. The movable cone is supported by spherical bearing and fixed to the curtain erect shaft which is mounted in an eccentric bushing, the bushing is mounted on a stop and pushes the bearing. The movable cone and erect shaft is driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through V-belts. In the lower part of a vertical shaft mounted on the eccentric bushing. When the eccentric sleeve rotates, the tapered surface of the shaft is aligned. When the movable cone approaching the fixed cone, rocks are ground into pieces, when the cone leaves, grinded materials is discharged from the outlet otverstiya.Fiksirovannaya cone can be ascended or descended by adjusting.

parameter

write to us

Related equipment